We decided that we should move back into the motorhome for at least a week before we planned to leave Mesa -- our experience has been that we always forget a number of things that we would like to have with us. It will be easier to get those items while we are still at Venture Out rather than having to drive back, purchase new, or do without.
As we were moving in, we noticed a puddle of water forming under the wet bay area of the rig. At first we thought it might be from the air conditioners being turned on and running pretty constantly, but then we thought that, it's so dry here, would there be that much condensation? Carl opened up the bay and found that, no, it wasn't condensation from the air conditioner, it was a broken fitting on the water softener system.
It had gotten really hot (high 90s - low 100s), so he decided to wait to work on it in the morning, "before it gets too hot".
![]() |
| The fitting from the hose had broken off in the inlet to the water softening system. |
![]() |
| After a couple of trips to the hardware store, Carl had the fitting end that he needed and was able to get it installed on the hose. |
![]() |
| A little later, he could reconnect to the water softening system. |
It was also time to re-charge the water softener, so he was able to take care of that too. He also changed out the filters on the RO system.
I am so grateful that Carl knows how to take care of all of these systems on the rig (and in our house)!
.jpg)
.jpg)
.jpg)
No comments:
Post a Comment